O Scale Scenes - all castings are sold unpainted 
            Return to casting selections 

       Here is something new we will be creating. Scenes to add  to your
       layout with little work for you. They will give talking points to your layout.
       I always have these kind of scenes around my layouts. And they always
       give everyone something to talk about. Give me some feedback as to
       scenes you would like to see. 

     RRMS-O-24  This month I made a new truck junker a 1930 Chevy flatbed truck with all sorts of
     goodies in the flatbed and scattered around. You could add this casting to other junk car castings
     we offer and make a great junk yard. Check out the detail and try to figure a good spot for this one.
     The casting measures 5 3/4" long by 3 1/4" wide and 2 " tall. All resin casting and comes unpainted.

                                                                                                 Price is $18.00.         

  RRMS-O-23 On my last trip to the Tahoe are I found a mine in Nevada and was kicking around and
   found a old junk pile with a 1941 Plymouth flatbed truck that someone yanked the rear end out and
   just dumped the the body on the ground. I thought it was cool and could be at an old mine site or a
   logging operation you decide. Has all the usual junk to laying around and old cat engine etc. So
   check out the pictures and enjoy. The casting measures 7" long by 3" wide and 2 " tall. All
   resin casting and comes unpainted.
                                                                                                  Price is $18.00.         

  RRMS-O-23 - Here is a abandoned Caboose. This casting could be used as a freight office
   a hobo hangout you just need to use you imagination. The inside is hollow and the roof is
   removable.  Check out all the detail molded into the base. Hope you enjoy this one. The casting
   measures  4 1/2" long by 4" wide and 2 3/4" tall.

                                                                                                    Price is $25.00.           

  RRMS-O-21 - Here is a 1953 Ford pickup for the O scale group. This is one of my favorite
    old cars. I have been asked to make later car models so here you are. Check out the rust
    on that hood and  the hole in the windshield. Hope you enjoy this one. The casting measures
    4 1/2" long by 4" wide and 1 3/4" tall.

                                                                                                     Price is $12.00.           

 RRMS-O-18 - This is an O scale casting of a house ruin. Who has not come on one
   of these when they were out exploring. All the is left is the basic foundation and some for
   the wood floor and chimney. Check out some of the junk left like old tin cans with the lid
   still on them and the old stool that is half gone. Anyway this could be an interesting addition
   to your layout. All resin casting and comes unpainted.  The casting measures 5" long by
   3 1/4" wide and 3 1/4"  high.   

                                                                                                    Price is $15.00.           

   

   RRMS-O-17 - This O scale casting is an old boxcar given a new life as a warehouse, office,
   freight house. You get the idea you can make it what works for you. Of course the normal
   accumulated junk around the casting. The interior is open so you can add what you want
   inside. So have some fun with this one. All resin casting and comes unpainted.  The casting
   measures 4 1/2" long by 3" wide and 1 1/2"  high. 
                                                                                               Price is $25.00.           

 
 
 

RRMS-O-16 - This castings is an old tractor put out to pasture after  many years of
   hard labor.  This casting will look good anywhere behind the barn or left in a junk yard.
   Just check out the junk littering the area. I see a lot of these classics out in the farm land
   around me. This will make a unique scene for your railroad. All resin casting and comes
   unpainted.  The casting measures 4 1/2" long by 3" wide and 1 1/2"  high.
                                                                                                  Price is $16.00.           

  
 

   RRMS-O-15 -  This is an old Packard truck that has been abandoned. This would fit
   behind an old mine or logging site or behind one of your business. Or if you want
   to make an auto junk yard we have several of these castings. I give you a steering
   wheel to add and you can use some wire to make the gear shifters. This will make
   a unique scene for your railroad. All resin casting and comes unpainted. The casting 
   measures 7" long by 3" wide and 1 1/2"  high.     Price is $20.00.   

   
         
 
    

  RRMS-O-14 -  This is the largest casting I have made to date. And takes about three times
   the resin one of the other large castings take. The casting is shipped in four pieces the
   base, winch, water tank and the boiler. This will make a unique scene for your railroad.
   All resin casting and comes unpainted. The casting measures 7 1/2" long by 4 1/2" wide
   and 4 1/2"  high.                                                            Price is $30.00.                  

 RRMS-O-13 - Here I have created some track bumpers for the ON30 crowd. These match
   up to the end of your existing track. You see the two styles below. This includes one of
   each for two castings. Both castings are about 3 1/2" by  2". All resin casting and comes
    unpainted.                                                                  
|                                                                                               Price is $8.00.                  

   RRMS-O-12 - Here is a Cat under repair or in the bone yard you decide. This casting would
    look in a logging, mining or even farming scene. Check out the tarp molded into the casting
    and the head is removed showing the exposed cylinders. The figure is not included and just
    to compare sizes. This casting is 4 3/4" by  4 1/2" and 2 1/4" high.  All resin casting and
    comes unpainted.
                                                                                 Price is $25.00.                               

   
   
      

    
     RRMS-O-11 - Here I go again another of junk car. This is a 1932 Coupe with a cloth top
   insert that has long rotten away and the interior is gutted. Check out the interior shot. The
   flathead engine is still around now ( must have been a blown motor or that would be gone by
    now) but that's about all. Added an old tree stump. This casting is two pieces for the detail
    guys to have some fun. This casting is 5" by  4" and  1 1/4" high.  All resin casting and comes
    unpainted.
                                                                                 Price is $10.00.    MMaking new Mold
 

RRMS-O-09 -  Well here is a casting that will get you imagination going where to put it? Behind
   the engine house, by the logging camp or by that old mine. This will be a study in rust and how
   weathered can I make this thing!! Mine is going in the bottom of that canyon below my trestle
   on my layout. The cab was cut down to show the wood falling apart. You may want to remove
   the resin cab  and make a real wood cab or add more detail its up to you. The cost on this one
   is not cheap since the mold will not last long and will have to be replaced a lot. But this will
   make a scene on your layout that will make viewers go WOW!!!  This casting is 5" by  3" and 
   2 3/4" high. All resin casting and comes unpainted. 
                                                                                                    Price is $25.00.          

          RRMS-O-01 - Here is our first scene for O scale. This junk car is way past its
         glory days. Its covered in junk and left to time and the elements.  All resin castings. 
         Measures 6” by 3 1/2” and 2” high. .
                                                                                                   Price is $10.00.           
   
         

      RRMS-O-02 - Here is the next O Scale Scene. We have all seen this one before the
     trash trucks use to wake you up once a week to dump the trash. You have a set of trash
     cans with lids, two w/o a lid, two with the lid half on and last but not least the spilt can.
     You also would have a burn barrel to burn your trash. Then check out the dog by the
     spilt can. And the cat on the fence. The fence is a separate piece add it or leave it off. 
     This is  a two piece casting that measures 3 1/2" by 2". Just paint them up and they
     are good to go.                                                                  Price is $7.50.           
        
      
                                  


       RRMS-O-03 - If you are working on a layout from the hills of Tennessee to the south 
       one of these would fit in your wooded area. Out of sight of the revenuers. Check the detail
       on this one, even the double barrel shotgun on the woodpile to keep the revenuers away.
       You have the jugs ready for the moonshine, a real production line. So have some fun with
       this one. Measures 3 1/2" by 2 1/2".                                    Price is $7.50              

   RRMS-O-04 - This castings shows the excitement I get of going to old junk yards. I could spend hours roaming
      through the old cars. This shows a 1931 Ford that could be out in the back of a abandoned house or in an alley.
      This is a two piece casting with the headlights cast separately. You can have some fun wit this one.
      Measures  4 1/4" by 3 1/2".                                    Price is $10.00           

        
        
                                                      

       RRMS-O-05 - Well I cannot stop making these, will be able to make a junk yard soon.
       This shows a 1934 Ford pickup that could be out in the back of a abandoned house or
        in an alley. Check out the junk in the pickup bed. You can have some fun with this one.
       All resin casting. Measures 5 1/2” by 3 1/2” and 1 1/2” high.
                                                                                                   Price is $10.00.           
 

       RRMS-O-07 -  This one is really cool all that is missing is the bullet holes. Just
       check out the detail. This old model T has seen better days. The seats rotted
       years ago and just left the wood slats. The inside of the cab even has dirt molded
       in. Notice the weed growing in the cab area. This casting is 4" by 3 1/2" and 1"
       high. All resin casting and comes unpainted.     Price is $10.00.                 

   RRMS-O-08 -  Here I go again another of junk car. This was a Ford with a cloth top
   insert that has long rotten away and the interior is gutted. Check out the interior
   shot. The flathead engine is still around now ( must have been a blown motor or
   that would be gone by now) but that's about all. This casting is 5" by  3" and 
   1 1/2" high. All resin casting and comes unpainted.  Price is $10.00.           

     RRMS-O-10 - Here is a loading dock you can use to load freight on to your cars.
           The dock measures 5" long by 2" wide and 3/4" tall. This is a one piece casting.
           All resin castings unpainted.
           
                                                                                              Price is $8.00.          

RRMS-O-20 - For you O scale types this month I have something special an old rail truck. You can
   add this to any engine house scene. This guy can set on any siding or can be setting as junk. I plan
   to make flat car load of this unit junked. All resin casting and comes unpainted. The casting measures
   5 1/2" long by 2" wide and 2 1/2" tall.
                                                                                                   Price is $23.00       Making new mold    

 
    The hood is removable here are some shots with the hood for a different look.



   Now here is one that I made a rust bucket that is not working. So you can see a lot of possibilities
   with this one.

   RRMS-O-19 - This casting is a display track to show off your latest engine or rolling stock. All resin
   casting and comes unpainted. The casting measures 6" long by 3" wide and 1" tall.
                                                                                                       Price is $10.00           

                                                              Return to casting selections